Bassett Crib assembly instructions :: Assembly

Bassett Crib assembly instructions

Assembly Instructions

Locate the step-by-step instructions for constructing your Bassett crib. These instructions should be inside the box with all the parts for your crib.

Contact the manufacturer if you do not receive the instructions with your purchase.

Verify you have all the parts necessary to assemble your Bassett crib. Compare the list of parts on your instruction manual with the pieces that came with your order. If you are missing a piece or if a piece is broken, contact the manufacturer for a replacement.

Move all the pieces into the room where the crib will be located. Some Bassett cribs are too large to fit through a standard doorway once assembled.

Attach the crib's stabilizer rails to the headboard and foot-board using screws. A pair of stabilizer rails (one of each side of the crib) and all necessary screws should be included with your purchase. Secure the rails with a washer and bolt. Tighten with an Allen wrench.

Insert the spring frame into place. This should fit snugly in the rectangular space created by the headboard, foot-board and two support rails. Secure the spring frame to the inside of the support rails using screws and bolts supplied with your purchase.

Attach the side rails to the crib, again using screws and bolts included with your purchase. Adding these pieces will complete the basic construction of the crib.

Move the crib to its desired location in the room. Some cribs are specifically designed for one side to butt up against a wall; others are more versatile and allow any side of the crib to be placed against a wall.

You might also like

Gro Furniture Crib Assembly Video
Gro Furniture Crib Assembly Video
Bassett Crib
Bassett Crib
AR North America AR Blue Clean AR118 1,500 PSI 1.5 GPM Hand Carry Electric Pressure Washer
Lawn & Patio (AR North America)
  • 1,500 PSI/1.50 GPM
  • Automatic safety valve with pressure shut-off at pump head
  • Three axial-piston wobble-plate pump
  • Tempered stainless steel plungers
  • 30-Foot power cord/20-Foot hose
Tactical Intent Barrel Nut by Tactical Intent
Sports (Tactical Intent)
  • Made in USA
  • MIL SPEC quality steel, black parkerized finish
Tekmat Tekmat 36-Inch Long Black Gun Cleaning Mat with AR-15 Imprint
Sports (Tekmat)
  • Black mat imprinted with AR-15 exploded view
  • Neoprene rubber backing provides a soft surface for working
  • Polyester Top surface will not harm your gun s finish
  • Detailed instructions and firearm facts
Molon Labe LLC Trigger Guard Magpul Enhanced Polymer Screw Assembly Upgrade Kit
Sports (Molon Labe LLC)
  • Screw Assembly kit for easy assembly
  • for use with Magpul MOE trigger guards
  • Provides increased clearance for use with gloves
  • Eliminates the annoying gap at the rear of standard trigger guards
Raddlock and BBRINGTOOL.com RADDLOCK FNH SCAR lock with FREE ARASSEMBLY RING Key TOOL
Sports (Raddlock and BBRINGTOOL.com)
  • BRAND NEW RADDLOCK FNH SCAR Kit
  • 16 and 17 - Easy to install with instructions
  • Can be set for ambidextrous use
  • MADE IN THE USA - Beware of imitations
  • Free ARASSEMBLY RING KEY TOOL for assembly and doubles as a key for the SCAR RADDOLOCK

Copyright © . All Rights Reserved