2000 Dodge Dakota Headlight Assembly :: Assembly

2000 Dodge Dakota Headlight Assembly

Dodge Dakota Rims

All Dodge Dakota Headlights for sale Tools required:

  • Flathead screwdriver

  • 10mm socket/ratchet

  • T10 Torx Driver

Step 1: Lift the truck's hood.

Step 2: Gently remove the gasket that protects the lighting assembly from the hood/radiator grille contact point.

Step 3: Locate and remove the T10 Torx screw that is in between the headlight assembly and parking light.

It is near the bottom of the assembly (from the front).

Step 4: You can now remove the parking light assembly from the front of the vehicle.

Step 5: Disconnect the wiring harnesses to fully release the parking assembly.

NOTE: If you are replacing the headlight assembly due to front end damage or wear, it may be a great time to replace the parking light, as well. After all, you already have it disengaged from the vehicle!

Step 6: Locate and remove the three 10mm retaining bolts that hold the headlight assembly in place. Gently remove the retaining pin to the upper-outside of the headlight assembly.

Step 7: You can now pull the headlight assembly from the vehicle.

Step 8: Disconnect the wiring harness from the back of the headlight assembly.

NOTE: If you ordered your replacement headlight from Go-Parts, it likely has new bulbs included with the assembly (as most of our models do). If so, you can move right to installation, saving you steps!

Step 9: Connect the wiring harness to the back of the new headlight assembly and move it into position.

To ensure that your headlight is properly aligned, lengthen (or shorten) the alignment post on the back of the assembly until it matches the length of the old assembly's alignment post.

Step 10: Secure the headlight by tightening the 10mm retaining bolts.

Step 11: Reattach the parking light.

Step 12: Reattach the rubber gasket that rests between the grille's contact point and the headlight assembly.

These Part Change / Installation Instructions Apply to:

97 1997, 98 1998, 99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004 Dodge Dakota Headlights Replacement Instructions

You might also like

Spec-D - Dual Halo Projector Headlights LEDs Dodge Dakota
Spec-D - Dual Halo Projector Headlights LEDs Dodge Dakota ...
HLF on a 2 Dodge Dakota
HLF on a 2000 Dodge Dakota
Headlights Depot Dodge Dakota/Durango Headlights OE Style Replacement Headlamps Driver/Passeng...
Automotive Parts and Accessories (Headlights Depot)
  • You Get Both Right And Left Headlights
  • Brand New In Box
  • OEM Fit and Finish
  • DOT and SAE
  • 1 Year Warranty
Automotive Parts and Accessories (Headlights Depot)
  • One Left Side Headlight Replacement Assembly (driver Side)
  • Brand New In Box
  • OEM Fit and Finish
  • DOT and SAE
  • 1 Year Warranty
Anzo USA Anzo USA 111059 Cadillac/Chevrolet/Dodge/GMC Crystal Clear Chrome With Amber Reflectors Headlight Assembly - (Sold in Pairs)
Automotive Parts and Accessories (Anzo USA)
  • Easy to install - directly replaces factory lenses
  • Thermo-Hygrometer (temperature and humidity chamber) and Rain-Resistant tested
  • SAE (Society of Automotive Engineers) and D.O.T. (Department of Transportation) compliant with FMVSS (Federal Motor Vehicle Safety Standarts) No. 108.
  • Provides clean and great match for hi-tech Euro style
Spyder Auto Spyder Auto Dodge Dakota/Durango Black Halogen Projector Headlight
Automotive Parts and Accessories (Spyder Auto)
  • All the tail lights package will come as a pair left side and right side; designed as direct bolt-on replacement parts
  • All wiring for the headlights was preassembled for essential plug and play application, halo rim wires need to connect and do some simple wiring connection
  • These lights are made by an OE approved and ISO certified manufacturer with the quality meet or exceed all OE standards
  • Some of the package includes light bulbs, for package which does not come with any light bulbs, you can apply the stock light bulbs for installation
AutoLightsBulbs Dodge Dakota/Durango Replacement Headlight Assembly (Diamond Design, Black) - 1-Pair
Automotive Parts and Accessories (AutoLightsBulbs)
  • Aftermarket performance headlight - pair(2-pic) - DOT/SAE certified
  • Headlight assembly - lens, housing, socket, and bulb included
  • Special coating on the lens surface prevents hazing and fading, ensuring proper illumination and operational safety

Copyright © . All Rights Reserved