BMW X5 Headlight Assembly :: Assembly

BMW X5 Headlight Assembly

Headlight High Beam Bulb Replacing: To disconnect the high beam bulb electrical connector, press the release tab and pull it straight off the bulb.Headlight Bulb Replacing: Working at the rear of the headlight assembly, unplug the headlight bulb electrical connector by squeezing the release tab and pulling it off. The low beam bulb is designated by a blue arrow, while the high beam bulb is indicated by the green arrow.

Figure 2

Headlight High Beam Bulb Replacing: To disconnect the high beam bulb electrical connector, press the release tab and pull it straight off the bulb. Next, rotate the headlight bulb counterclockwise and remove it from the headlight assembly.

Figure 3

Headlight Low Beam Bulb Replacing: To disconnect the low beam bulb electrical connector, press the release tab (green arrow) and pull it straight off the bulb.Headlight Low Beam Bulb Replacing: To disconnect the low beam bulb electrical connector, press the release tab (green arrow) and pull it straight off the bulb. Next, rotate the headlight bulb holder (yellow arrow) counterclockwise and remove it from the headlight assembly. Pull the old bulb (red arrow) out of the holder (blue arrow). Install the new headlight bulb into the holder, then into the headlight assembly. Rotate it clockwise to lock into place. Connect the electrical connector and check the bulb's operation.

Figure 4

Headlight assembly replacing: Working at the rear of the headlight assembly, unplug the headlight bulb electrical connector by squeezing the release tab and pulling it off.Headlight assembly replacing: Working at the rear of the headlight assembly, unplug the headlight bulb electrical connector by squeezing the release tab and pulling it off. The blue arrow indicates the low beam bulb. A green arrow indicates the high beam bulb.

Figure 5

Remove the four 8mm headlight mounting fasteners. The green arrows point to three of the fasteners. The yellow arrow and inset show the final headlight fastener. Disconnect the side marker bulb electrical connector (blue arrow) by squeezing the release tab and pulling it off. The connector is mounted on the headlight near the rear outer fastener.

Figure 6

Slide the headlight assembly from the vehicle by pulling it straight out toward the front of the vehicle.

Figure 7

Once the headlight assembly is removed, transfer the plastic trim piece over to the new headlight. Release the retaining tabs. Detach the tab indicated by the green arrow. Squeeze the tabs (yellow arrow) to release the trim piece. Connect the electrical connector and check the bulb's operation.

You might also like

Headlight Restoration Saved Owner Thousands on BMW X5
Headlight Restoration Saved Owner Thousands on BMW X5 ...
BMW X5 Headlight Restoration Kit DIY or Headlight
BMW X5 Headlight Restoration Kit DIY or Headlight ...
Headlights Depot BMW X5 Headlights With Amber Corners OE Style Replacement Headlamps Driver/Pa...
Automotive Parts and Accessories (Headlights Depot)
  • You Get Both Right And Left Headlights
  • Brand New In Box
  • OEM Fit and Finish
  • DOT and SAE
  • 1 Year Warranty
Headlights Depot BMW X5 Headlight With Amber Corner Passenger Side New Halogen Type Headlamp
Automotive Parts and Accessories (Headlights Depot)
  • Brand New In Box
  • OEM Fit and Finish
  • DOT and SAE
  • 1 Year Warranty
Depo Depo 344-1120L-AS2Y BMW X5 Driver Side Replacement Headlight Assembly
Automotive Parts and Accessories (Depo)
  • Meets or exceeds DOT & SAE standards
  • Exact replacement for factory assembly
  • Head lamp assembly with bulb or head lamp assembly with bulb & socket included for attached side marker/park signal lamp
SPPC SPPC Projector Headlights Halo Black Amber For BMW X5 E53 - Passenger and Driver Side
Automotive Parts and Accessories (SPPC)
  • Meets or Exceeds DOT & SAE Standards
  • Includes Both Driver & Passenger Side
  • Direct OEM Replacement No Modification Needed
  • New Aftermarket Part
  • 30 Days Money Back Guarantee & 60 Days Limited Warranty
Kensun HID Xenon Low Beam Headlight Replacement Bulbs by Kensun - (Pack of two bulbs) - D2S - 6000K
Automotive Parts and Accessories (Kensun)
  • #1 Customer Service & Quality, HID Xenon Headlight Replacement Bulbs
  • Easy and Simple installation. Usually takes less than 20 minutes! Plug-and-Play in most vehicles. Some vehicles may need professional installation. The manufacturer...
  • Includes: pair of D2S super-bright performance hid xenon bulbs
  • We specialize in auto parts and universal car accessories. Upgrade your oem stock halogen or LED low beam, high beam, fog light, interior lights and all off road...
  • Ultra Bright Fused-Quartz Xenon Bulb: Produces 3X brighter light than halogen, uses up to 80% less power, increases visibility, and has long lasting non-fading lifetime

Copyright © . All Rights Reserved