Trigger assembly :: Assembly

Trigger assembly

Disassembly of the trigger

Etail stripping the M1 Garand's trigger group is actually pretty easy. Here is how to do it.

The first step is to make sure the hammer is in the UP or FIRED position. This relieves pressure on the hammer spring plunger and makes it much easier to disassemble.

Most of the things that need doing can be accomplished with a standard GI Combo Tool.

Next invert the trigger group and use the combo tool to firmly push the Trigger Pin out about 1/3 of the way.

Next turn the trigger group over and make a backwards 'C' with my right hand. Apply pressure to the Trigger & Sear assembly so that the Trigger Pin will slide out freely. This takes a little practice.

Pull the Trigger Pin Free.

Now remove the Trigger & Sear Assembly as well as the Hammer Spring Housing and Plunger Assembly.

To do this simply push the trigger forward a little and while holding the Hammer Spring Housing lift the entire group up and out.

You might also like

M1 Garand Trigger Group Assembly
M1 Garand Trigger Group Assembly
Brushing the Trigger Assembly of a Springfield XD 9mm Handgun
Brushing the Trigger Assembly of a Springfield XD 9mm Handgun
Interstate Arms Corp Remington Aerosol Shotgun Cleaner (18-Ounce)
Sports (Interstate Arms Corp)
  • Dissolves powder residue, fouled lubricants, burnt carbon deposits
  • Blasts away gummy caked on grime
  • Cleans trigger groups, gas ports, choke tube threading, receivers, chambers, barrels and magazine tubes
KR Ideas Standard Horizontal Wall Mounts for a SKS Rifle (Made in the USA)
Sports (KR Ideas)
  • Trigger support mount: 2long
  • Barrel support mount: 4 ½long
  • Mounting posts: 2long
  • Made out of black thermal plastic
  • Mounting hardware included

Copyright © . All Rights Reserved